The Dream 1000 Project

Brother company is sponsoring a wonderful project, ‘The Dream 1000 Project’. As we all heard, Japan had a major disaster this year, Earthquake followed by Tsunami that devastated the area. The folks there are still struggling to put their lives back together. Brother’s goal is to collect school bags for the children made from a pattern that takes approximately 45 minutes to complete. The bags will be collected and distributed to the children affected by the disaster. Some Brother dealers agreed to collect the bags and ship them, check with your local dealer to see if they are participating. Follow the link below for the Dream 1000 project information and instructions on how to construct the bags and where to send them.  It’s the little things that make a difference. The kids will appreciate any and all efforts. The complete bag must be shipped by December 8, 2011.

See how to make this bag:
You can find: How To: Dream 1000 Project Bag – Part 1
You can find: How To: Dream 1000 Project Bag – Part 2

See information Brother provided and consider joining for a great cause:

The Dream 1000 Project – Tuesday, October 25 at 8:00am – December 8 at 9:00am

Brother Industries Ltd., parent company of Brother International Corporation, created the “Dream 1000 Project” with the goal of collecting 1000 bags for young school age boys and girls in Japan who were affected by the earthquake and tsunami in March 2011. We’d like to surpass this goal, but we’ll need your help.

We invite you to use your sewing machine to send hopes, dreams and love to the children of Japan by creating multipurpose school bags.
Send bags to:

Ship by December 8 to:

Dream 1000 Project
Brother International Corporation
Attn: HAD Shirley
100 Somerset Corporate Blvd.
Bridgewater, NJ 08807

Please send by a trackable method (such as UPS).

In the link below we have provided the specific instructions on how to create and where to send the bags.
The bags can be constructed in less than an hour and embellished with embroidery, quilting or applique.
You can find the instructions below:
http://ow.ly/d/o3X

For your convenience, see information:

Join the event on facebook:
https://www.facebook.com/event.php?eid=235853446469748

Remember, the goal is 1000 bags, the hope is to far surpass this. Thank you for all your help!

Houston, TX
Visit Brother at the George R. Brown Convention Center!
1001 Avenida De Las Americas, Houston, TX
Brother “drop-in” classroom #361A
Monday, October 31 – Saturday, November 5
8:00 am – noon. 1:00 pm – 5:00 pm
Sunday, November 6
8:00 am – noon only
All materials for creating the bags will be available in the classroom!

Central California
Central Valley Vacuum & Sewing Center customers, we are participating and will allow you to come into the store and use one of our Brother embroidery machines so that you can also participate.
We will even ship them to save you the postage. info@cvvsc.com
41453 Avenue, Madera, CA 93636     559-822-3300      www.cvvsc.com

East Bay of SF, CA:
We are hosting a free sewing bee using all of our fabulous modern sewing technology to sew and embroider tote bags for children in Japan who are still greatly impacted by the effects of the 2011 earthquake and tsunami. Joining Brother dealers across America, our joint goal is to donate at least 1000 totes for school age Japanese boys and girls.
sewnow! will provide all the supplies and set-up, as well as refreshments and a take home gift for all participants. Basic sewing skills required – ages 8-100 are welcome for a morning of sewing fun.
Register by clicking the facebook event or email info@sewnow.com to confirm participation.
960 Moraga Rd., Lafayette, CA 94549   925.283.7396     http://www.sewnow.com
Join us at sewnow! to participate in the ‘Dream 1000 Project.

To see some pictures of the area affected and how it’s changing:
http://blogs.sacbee.com/photos/2011/09/japan-marks-6-months-since-ear.html

Let’s create something!

How To: Halloween Embroidered Greeting Card With Cat and Pumpkin

You love to Embroider as well as making your own Greeting cards? Why not combine your passions?

Start by hooping tear away or cut away stabilizer.

Using spray adhesive, such as, Sulky KK 2000.

Put a piece of colored felt on top of the stabilizer.

Take a piece of Solvy.

Using spray adhesive to put the Solvy on top of the felt.

This step is not a must but it will help achieve a better embroidery.
Add a border with wide stitches, bigger than the design you are about to stitch.
It will help prevent bunching up as well as shifting.
It is best is you use a similar color to your background.

You now have your creative license to change the colors that you are using from the suggested colors.

As it keeps embroidering it starts looking like a picture.

We changes many of the colors suggested, the cat as well as the Yellow for the light effect in the pumpkin.

Now that you are done with your embroidery design. Take it out of the embroidery machine.
For this project we used Brother PE-780 model.

We recommend using this type of scissors to cut your jump stitches.
Because they have a curve you will be better able to cut close to the design without cutting the stitches.

Take your design out of the Embroidery hoop.

We will start working on the back side of our Embroidery.
Take a seam ripper and remove the bobbin thread of the border.

Continue taking out all the stitches around.
This will give you better result then trying to take the stitches out on the front of your embroidery.

Once you have removed all the bobbin thread, the front thread will just come off as a long piece of thread.

Now that we have just our embroidery, it’s time to remove the Solvy from the top.

Tear it off as best you can, most of it should come off easily.

Since it’s water soluble, should you have any pieces left behind, a little water will take care of it.


We recommend using Pacesetter Embroidery thread.
You get great quality thread for a reasonable price.

We bought greeting cards that have a photo frame cutout pre-made.
Feel free to make your own. When you select what Embroidery you want to use, make sure it will fit the frame size.
Some machines will let you resize your designs, take advantage of that.

We start with a blank card and decorate it with several stamps.

The Words “Happy Halloween” with a stamp on top.

We chose to use Uniball silver metallic pens.

We fill the empty spaces in the letters with our Orange color pen.
You will end up with a blend of Orange and sparkling Silver.

We love to sparkle so we’re going to putt some Bo-Nash sparkles on our card.

Great shiny colors they offer.

For a more precise result we will use the Bo-Nash glue pen.

Once we have our stamps in place, we will trace a few lines with the glue Pen.

When you use the glue pen, the glue will come in Blue color.
You know it’s ready to use once it dries Clear.

Put a finger into the sparkles, they will attach to your finger because of the oils you naturally have on it.
Then just go over the glue a few times. You are done once you see all the glue has been covered.
A quick no mess easy way to add some sparkle.

Add as many stamps and decorations as you like.
Now it’s time to put your embroidery into the picture frame.
Cut your Embroidery to size and gently tuck it in.

Make sure your embroidery is straight. Secure with a few dabs of glue if needed.

Your project is now complete! enjoy.

How to: Polymer Clay beads Mokume Gane Style – Part 2

You can find: How to: Polymer Clay beads Mokume Gane Style – Part 1

Take the colorful Polymer Clay slices you created and start wrapping your made beads, gently as to keep it’s shape.

Repeat for as many beads as you want.

Shapes are up to you, from larger pendants to your basic round beads.

You can also make imprints on your newly created beads.

Make sure you make holes in your beads so you can string it or attach with jump ring.
Use a skewer or anything size appropriate to create the holes.

Put your beads on a rack so your beads will retain it’s shape and have even heat on them.

Use oven thermometer to make sure the temperature is actually same as indicted.
Should the temperature be off you can easily burn your Polymer Clay beads.

We used an old toaster oven to bake our beads. It is not recommended to use your kitchen oven.
Put your oven outdoors, in the backyard or balcony if possible.

Now it’s time to sand our beads.
It is better to sand the Polymer Clay beads under water so you are not breathing in the dust.

Start of with a more coarse grade sanding paper.

Gradually work your way to a more finer sanding paper.

Keep working on sanding your beads on finer sanding paper for best results.

Notice the sides of the pendant are now straight and aligned.

While the top and bottom have a slight curve to them.
The design style is up to you.

Finish by buffing your beads on an old pair of jeans.

There are different methods to seal your beads.
We chose to use Pledge with future shine.

We used floral foam to put our beads on skewers and then using a brush coated them with two layers.
Check product instructions for drying time between layers.

Your Polymer Clay beads are now ready to be used. From Jewelry to decorative projects.

Your project is now complete! enjoy.

You can find: How to: Polymer Clay beads Mokume Gane Style – Part 1