Happy Thanksgivings everyone!
Brother started ‘Dream 1000 Project’ by requesting folks to make a bag to donate to the kids affected by the Tsunami and Earthquake in Japan.

 You can find: How To: Dream 1000 Project Bag – Part 1

To create the straps of bag, take one of the 5″ x 20″ strip pieces.
Fold it in half, right side of fabric facing out and iron.

Open fold.
Fold each side towards just created center fold.
Iron in place.

Take both sides and fold together.
Iron into place.
Repeat for other strip.
Top stitch on both sides of strips.

To attach strap to bag, measure 5″ from side of bag.

Attach to inside of bag, pin and stitch a square for added strength.
Make sure straps are aligned with each other and are not looped.
Cut a piece of paper the size of the square and use it as guide to have uniform square stitches.

To attach the button, find center position and mark 1/2″ from top of bag.

Clover caulk pens are easy to use for all your marking needs.

Center button on marked line and mark on both sides of button.

Use buttonhole foot, marked as A. Buttonhole # 9 was selected for this type of fabric.

Cut open your buttonhole and make sure button goes through.
Attach button on inside of bag.

Attach button on inside of bag.

Bag is now ready for your final touches of decoration should you chose to add some.

Start of by removing any remaining pieces of the water soluble topper .

Add a few Swarovski Crystals or Rhinestones hot fix to bag.

Final touches:
Cut off any loose thread
Remove caulk markings

Bag is now complete.

Be proud! you just made a kid in Japan very happy.
Don’t forget, deadline to ship bags: December 8, 2011

For more details about ‘Dream 1000 Project’: www.artsandcraftsplaza.com/?p=689

 You can find: How To: Dream 1000 Project Bag – Part 1

Let’s create something!

Thanksgivings is fast approaching and with that spreading some goodwill.
Brother started a ‘Dream 1000 Project’ by requesting folks to make a bag to donate to the kids affected by the Tsunami and Earthquake in Japan.
Deadline to ship bags: December 8, 2011
For more details about this project: Dream 1000 Project

Are you a beginner sewer? Just want to check out how the bag is constructed before taking it on?
Let’s get started!

Suggested fabric: Denim or Quilting fabrics.
Start of by cutting your fabric to:
One 40″ x 20″
Two 5″ x 20″
Optional pocket, one 6″x 6″

As these bags are not lined, it is important to serge or overcast all raw edges of fabric.
For those without a serger, use a G foot and choose one of the overcast stitches.

Put your fabric against the metal part in the middle of your foot.
Use same color thread as your bobbin.
Suggested thread: Polyester Mettler.

How your raw edges of fabric should look like.

To create the pocket, we start by Embroidering it first.
Hoop a tear away stabilizer, use Spry adhesive to attach your 6″x 6″ piece of fabric.
On top of that put your water soluble topper with spry adhesive.

Embroider something you think the kid that will get this bag will appreciate.
Think about color combination and overall look of the bag.

Change the foot of your machine and select a straight stitch.
This straight stitch uses a J foot.
Experiment with a scrap of fabric first and then adjust width and length of the stitch.

Measure 1/2 an inch from top of pocket.

Fold to the back of pocket.
Iron in place for ease and better result.

Top stitch top of pocket.

Folder back other 3 sides of pocket 1/2″ and iron.
Find center position on front of bag and pin.

Stitch both sides and bottom of pocket to bag.

Should you have any marking on fabric like this fold on fabric on back side of the bag, it’s a chance to decorate.

Make a straight line mark with caulk on unwanted fold line.

Add a ribbon in matching or contrasting color.
You may want to add another piece of fabric instead of ribbon.
Top stitch ribbon on both sides to secure to fabric.

With right sides of fabric facing together, Stitch both sides of bag with 5/8″ seam allowance from edge of fabric.

Trim and access ribbon or any loose thread.

Iron open the side seams.

From top of bag fold towards the inside of bag 1 1/4″ and iron or pin.

Use straight or decorative stitch 1 1/4″ from top of bag.
This picture shows straight stitch.

To create depth to the bag, add a gusset.
At bottom side of bag, measure 1 1/2″ from corner and mark.
Mark other bottom side as well.

Stitch over line on both sides.

Turn bag right side out.
View of how gusset changed appearance of bag.

 You can find: How To: Dream 1000 Project Bag – Part 2

Let’s create something!

Celebration of Craftswomen took place in November 11-13, 2011, San Francisco.
Bask in the view of San Francisco when you come to this festival.

It began in 1976 as a small crafts show.
For the past three decades, The Women’s Building Celebration of Craftswomen has allowed Bay Area residents, along with visitors of San Francisco from throughout the world, to discover the work of the nation’s best female artisans and fine artists.
Celebration of Craftswomen is the largest event celebrating the craft of women in the nation.
www.celebrationofcraftswomen.org

To follow on Facebook:
www.facebook.com/celebration.craftswomen
Among the contemporary and traditional handcrafted items you can fine:
Functional and decorative ceramic and glass vessels.
Sculpted wood and works of metal.
Polymer  clay, beaded, stone and precious metal jewelry.
Women, painted silk, leather clothing and wearable.
Home Furniture and accessories.
Fine art sculpture.
Photography.
Watercolor and oil paintings.

Don’t miss the hidden treasures as you walk by them, such as, Greens Restaurant, Fort Mason in San Francisco for some beautiful bayside vegetarian dining.
www.greensrestaurant.com
The Oatmeal raisin cookie was to die for!

THE WOMENS BUILDING (TWB) is a multi-service community center whose mission is to provide women and girls with the tools and resources they need to achieve full and participation is society.
The Women’s Building is located at 3543 18th Street in San Francisco.
For information call 415-431-1180 or visit www.womensbuilding.org

Always ask the artist permission to take a picture of their booth and/or individual item.

A recap of select booths:

Rene Almon Woodworks, her inspiration comes from organic shapes and the wood itself. Building long lasting quality furniture, pleasing to the eye and inviting to touch.
www.renealmonwoodworks.com

Alexandra Von Burg, creating Fairy Tale imagery with soft sculptured dolls and fiber paintings
Look for her workshops to hone the art-making skills that enhance anyone’s natural talent.
www.alexandravonburg.com

Anne Klocko, produces different types of artwork, Vinyl Clay Artwork, Figurative Sculpture and Ceramic Sculpture are whimsy original works of art.
www.anneklocko.com

Margaret Grisz-Dow, passionate about art, her ceramic work & drawing she is integrating these by making incised drawings on the surface of her clay pieces.
Teaching  in a relaxed aesthetic environment, which is often in her own beautiful home studio.
Contact: mgriszdow@yahoo.com

Tess McGuire, hats are knitted on a knitting loom out of wool yarn and then felted using hot water, soap and friction to turn a loosely knitted fabric into a warm, solid, and virtually waterproof garment.
www.tessmcguire.com

Mountain Exotics, taking the beauty, texture of wood to form our unique products.
We create heirlooms from ‘Tree to Street.
www.mountainexotics.com

Monterey Fiber and Design by Margaret Thompson

Naoko, Creating botanically themed felt and glass Jewelry.
10% of sales are donated to humanitarian non profit organizations.
www.naokonojiri.com

Alchemy, Fine chocolate, pastry, & baked delicacies, Savory catering, Classes.
www.facebook.com/pages/Alchemy/130946720282942

Ruxton Designs, mixed media art, vintage buttons, metal hardware, felt all combined in a unique way by Nicky Ruxton.
www.ruxtondesigns.com
Sharing a booth with Laube photography, a joyful rendition of California by Nancy Laube.
www.nancylaube.com

Large Leather is a beautiful store in Sonoma, California.
Choose from in house designs to custom orders, by Paul Terwilliger and Jessica Zoutendijk.
www.largeleather.biz

JYC Arts, Fine Arts painter, Illustrator, Fiber artist as well as Jeweler and quilter.
Working with non traditional fabrics in traditional ways.
www.janecorich.com

Janice Cormier, functional and non functional ceramic art, sculptural vessels, figurative sculpture, small series of functional pottery, and Jewelry.
www.janicecormier.ca
Sharing a booth with Judy Beebe Designs, Merino wool scarves and gloves.
Creating elegant, comfortable, neck pieces with rich texture & color.
www.etsy.com/shop/judybeebedesigns

Theresa Honeywell, provocative imagery and macho icons are rendered into delicate and beautiful pieces of art.
Her inspiration comes in the contrast between art and craft, macho and feminine.
www.theresahoneywell.com

Booths 421-422 is a collaborative mixture of a group of women, a web site is in the pipe line.

To contact the artists directly:
Wanda Fudge, wfudge@peoplepc.com
Colleen Ehle Patell, mixed media figurative art, www.wildwackywomendesigns.com
Suzanne Duran, artist, miblu3@yahoo.com
Mary Porter Vaughan, fine art dolls, www.mpvdolls.com
Donna Perry, art dolls, mixed media artist, dreamandplay.blogspot.com
Zanaib Nia, artist, zniagreen@yahoo.com
Stephanie Smith, doll maker, smitharts@yahoo.com
Bonnie Hoover, Whimsical cloth doll creations, bondonhoov@sbcglobal.net

Tree Stump, Master wood artisans Christine and Ron Sisco prove Fine Art can be functional.
In addition to custom furniture, their most popular pieces are spoons and bread boards.
www.treestump.biz

Santa Barbara Felted Fibers, wearables fiber Art, soft and billowy, exciting and sometimes just wild and crazy.
www.sbfeltedfibers.com

Enchanted Burl, Burls form as an outgrowth on the trunk of a tree and/or within the root system transformed to tables, chairs, lamps, clocks, vessels and serving platters.
www.enchantedburl.com

A close up look on this gorgeous crafted chair.
The vessels have been used as food servers, three-dimensional wall art, center conversational pieces, and even spiritual baptismal vessels.

Browse the list of the entertainment schedule that was offered at the rear stage
www.womensbuilding.org/craftsfair/Womens_Building_Craft_Fair/ENTERTAINMENT.html

Zola De Firmian, Fine Art Ceramics and tile design, one-of-a-kind porcelain and stoneware pieces are hand-built, or cast, then carved, using simple molds of own design.
Project Greenheart, First, 10% of sales go to support programs that connect youth with art and nature.
www.zinfusionz.com

Dawn Mountain LeatherArt, creating and designing original Leatherart pieces.
Decorative techniques such as trapunto, pleating, weaving, and beading are frequently used on one-of-a-kind pieces
www.dawnmountainleatherart.com

FOR INFORMATION ABOUT THE SHOW CONTACT:
TEEVAN PRODUCTIONS
1557- 15TH AVE.
SAN FRANCISCO, CA 94122
PHONE: (650) 615-6838
FAX: (415) 731-6794
EMAIL: CRAFTSWOMEN@GMAIL.COM

Hope you enjoyed Celebration of Craftswomen!
Didn’t make it this year? Try and make it to next year.

All pictures were taken after approval by the artist.

Let’s create something!

Came across this blog post at http://www.manycreativegifts.blogspot.com, enjoy!
It’s a great blog with lots of ideas and information.
With the holiday season coming, you are sure to want to create something for your family and friends.

Free Craft and Crochet eBooks

I’m so glad to be able to pass along two new and free ebooks from the FaveCrafts folks!
The first one has 17 popular crochet items that are easy enough for a beginner to make, like a fun little caplet, a bottoms up hat, and a really neat 8-point ripple afghan.
You can find the free and instant download at:
http://www.allfreecrochet.com/Miscellaneous-Crochet/17-Popular-Free-Crochet-Patterns-eBook

The second book will start to get you in the mood for the holidays.

This ebook has 7 fun craft projects for Christmas time.
I think I’m going to give the Christmas Card Saver a try!
Also included are the Felt and Wire Angel (pg. 5), the Christmas Candy Jar Labels (pg. 11), and a Wine Cork Wreath (pg. 19).
You can get this eBook free at:

http://www.allfreechristmascrafts.com/Christmas-Ornament-Crafts/7-Thrifty-Christmas-Craft-Ideas-eBook

Happy Crafting!!

Brother company is sponsoring a wonderful project, ‘The Dream 1000 Project’. As we all heard, Japan had a major disaster this year, Earthquake followed by Tsunami that devastated the area. The folks there are still struggling to put their lives back together. Brother’s goal is to collect school bags for the children made from a pattern that takes approximately 45 minutes to complete. The bags will be collected and distributed to the children affected by the disaster. Some Brother dealers agreed to collect the bags and ship them, check with your local dealer to see if they are participating. Follow the link below for the Dream 1000 project information and instructions on how to construct the bags and where to send them.  It’s the little things that make a difference. The kids will appreciate any and all efforts. The complete bag must be shipped by December 8, 2011.

See how to make this bag:
You can find: How To: Dream 1000 Project Bag – Part 1
You can find: How To: Dream 1000 Project Bag – Part 2

See information Brother provided and consider joining for a great cause:

The Dream 1000 Project – Tuesday, October 25 at 8:00am – December 8 at 9:00am

Brother Industries Ltd., parent company of Brother International Corporation, created the “Dream 1000 Project” with the goal of collecting 1000 bags for young school age boys and girls in Japan who were affected by the earthquake and tsunami in March 2011. We’d like to surpass this goal, but we’ll need your help.

We invite you to use your sewing machine to send hopes, dreams and love to the children of Japan by creating multipurpose school bags.
Send bags to:

Ship by December 8 to:

Dream 1000 Project
Brother International Corporation
Attn: HAD Shirley
100 Somerset Corporate Blvd.
Bridgewater, NJ 08807

Please send by a trackable method (such as UPS).

In the link below we have provided the specific instructions on how to create and where to send the bags.
The bags can be constructed in less than an hour and embellished with embroidery, quilting or applique.
You can find the instructions below:
http://ow.ly/d/o3X

For your convenience, see information:

Join the event on facebook:
https://www.facebook.com/event.php?eid=235853446469748

Remember, the goal is 1000 bags, the hope is to far surpass this. Thank you for all your help!

Houston, TX
Visit Brother at the George R. Brown Convention Center!
1001 Avenida De Las Americas, Houston, TX
Brother “drop-in” classroom #361A
Monday, October 31 – Saturday, November 5
8:00 am – noon. 1:00 pm – 5:00 pm
Sunday, November 6
8:00 am – noon only
All materials for creating the bags will be available in the classroom!

Central California
Central Valley Vacuum & Sewing Center customers, we are participating and will allow you to come into the store and use one of our Brother embroidery machines so that you can also participate.
We will even ship them to save you the postage. info@cvvsc.com
41453 Avenue, Madera, CA 93636     559-822-3300      www.cvvsc.com

East Bay of SF, CA:
We are hosting a free sewing bee using all of our fabulous modern sewing technology to sew and embroider tote bags for children in Japan who are still greatly impacted by the effects of the 2011 earthquake and tsunami. Joining Brother dealers across America, our joint goal is to donate at least 1000 totes for school age Japanese boys and girls.
sewnow! will provide all the supplies and set-up, as well as refreshments and a take home gift for all participants. Basic sewing skills required – ages 8-100 are welcome for a morning of sewing fun.
Register by clicking the facebook event or email info@sewnow.com to confirm participation.
960 Moraga Rd., Lafayette, CA 94549   925.283.7396     http://www.sewnow.com
Join us at sewnow! to participate in the ‘Dream 1000 Project.

To see some pictures of the area affected and how it’s changing:
http://blogs.sacbee.com/photos/2011/09/japan-marks-6-months-since-ear.html

Let’s create something!

You love to Embroider as well as making your own Greeting cards? Why not combine your passions?

Start by hooping tear away or cut away stabilizer.

Using spray adhesive, such as, Sulky KK 2000.

Put a piece of colored felt on top of the stabilizer.

Take a piece of Solvy.

Using spray adhesive to put the Solvy on top of the felt.

This step is not a must but it will help achieve a better embroidery.
Add a border with wide stitches, bigger than the design you are about to stitch.
It will help prevent bunching up as well as shifting.
It is best is you use a similar color to your background.

You now have your creative license to change the colors that you are using from the suggested colors.

As it keeps embroidering it starts looking like a picture.

We changes many of the colors suggested, the cat as well as the Yellow for the light effect in the pumpkin.

Now that you are done with your embroidery design. Take it out of the embroidery machine.
For this project we used Brother PE-780 model.

We recommend using this type of scissors to cut your jump stitches.
Because they have a curve you will be better able to cut close to the design without cutting the stitches.

Take your design out of the Embroidery hoop.

We will start working on the back side of our Embroidery.
Take a seam ripper and remove the bobbin thread of the border.

Continue taking out all the stitches around.
This will give you better result then trying to take the stitches out on the front of your embroidery.

Once you have removed all the bobbin thread, the front thread will just come off as a long piece of thread.

Now that we have just our embroidery, it’s time to remove the Solvy from the top.

Tear it off as best you can, most of it should come off easily.

Since it’s water soluble, should you have any pieces left behind, a little water will take care of it.

We recommend using Pacesetter Embroidery thread.
You get great quality thread for a reasonable price.

We bought greeting cards that have a photo frame cutout pre-made.
Feel free to make your own. When you select what Embroidery you want to use, make sure it will fit the frame size.
Some machines will let you resize your designs, take advantage of that.

We start with a blank card and decorate it with several stamps.

The Words “Happy Halloween” with a stamp on top.

We chose to use Uniball silver metallic pens.

We fill the empty spaces in the letters with our Orange color pen.
You will end up with a blend of Orange and sparkling Silver.

We love to sparkle so we’re going to putt some Bo-Nash sparkles on our card.

Great shiny colors they offer.

For a more precise result we will use the Bo-Nash glue pen.

Once we have our stamps in place, we will trace a few lines with the glue Pen.

When you use the glue pen, the glue will come in Blue color.
You know it’s ready to use once it dries Clear.

Put a finger into the sparkles, they will attach to your finger because of the oils you naturally have on it.
Then just go over the glue a few times. You are done once you see all the glue has been covered.
A quick no mess easy way to add some sparkle.

Add as many stamps and decorations as you like.
Now it’s time to put your embroidery into the picture frame.
Cut your Embroidery to size and gently tuck it in.

Make sure your embroidery is straight. Secure with a few dabs of glue if needed.

Your project is now complete! enjoy.

You can find: How to: Polymer Clay beads Mokume Gane Style – Part 1

Take the colorful Polymer Clay slices you created and start wrapping your made beads, gently as to keep it’s shape.

Repeat for as many beads as you want.

Shapes are up to you, from larger pendants to your basic round beads.

You can also make imprints on your newly created beads.

Make sure you make holes in your beads so you can string it or attach with jump ring.
Use a skewer or anything size appropriate to create the holes.

Put your beads on a rack so your beads will retain it’s shape and have even heat on them.

Use oven thermometer to make sure the temperature is actually same as indicted.
Should the temperature be off you can easily burn your Polymer Clay beads.

We used an old toaster oven to bake our beads. It is not recommended to use your kitchen oven.
Put your oven outdoors, in the backyard or balcony if possible.

Now it’s time to sand our beads.
It is better to sand the Polymer Clay beads under water so you are not breathing in the dust.

Start of with a more coarse grade sanding paper.

Gradually work your way to a more finer sanding paper.

Keep working on sanding your beads on finer sanding paper for best results.

Notice the sides of the pendant are now straight and aligned.

While the top and bottom have a slight curve to them.
The design style is up to you.

Finish by buffing your beads on an old pair of jeans.

There are different methods to seal your beads.
We chose to use Pledge with future shine.

We used floral foam to put our beads on skewers and then using a brush coated them with two layers.
Check product instructions for drying time between layers.

Your Polymer Clay beads are now ready to be used. From Jewelry to decorative projects.

Your project is now complete! enjoy.

You can find: How to: Polymer Clay beads Mokume Gane Style – Part 1

My friend Catherine suggested we have a play day making beads from Polymer Clay in Mokume Gane style.
This was my first attempt and not too shabby if I do say so myself.

Start off by protecting the work surface. In this case we used Protecto film.

Pick a color and start working with it. We used Purple.

Choose another color you would like to use with your design. We used light Blue.

Want a shade of color but you don’t have it?
Not a problem, just mix two or more colors.
Start by cutting them into small pieces (we used a mixer to achieve these results)

Then start working the two colors together.

You will end up with the color you want. We were going for Lime Green.

Once you have all your colors it’s time to move on to the next step.
We used an old pasta maker.

Gradually make your clay thiner.

Cut your colors into 3 parts roughly the same size.

Then add Silver leaf on about 1/2 your color Polymer Clay blocks.
Make sure to cover at least 1 of every color.

Now it’s time to stack them.
Be sure to alternate between a block with Silver leaf and a block without.
As well as the different colors.

Once you have your block put dents it different sizes randomly spaced.
Don’t push all the way down (don’t create a hole).

Now it’s time to slice into your block at an angle.
You want your cut pieces to consist of several layers.

You can now create your base shape with a color you will cover partly or completely, it’s up to you.

You can find: How to: Polymer Clay beads Mokume Gane Style – Part 2

You’ve decided your business is coming along and you want to try and participate in a craft show.
This is what you can expect…

You will get an empty booth.

Some shows will let you rent a carpet, tables, chairs etc.
Check with the event organizer for exact details as it varies from show to show.

You start unloading the equipment and supplies you brought.
A u-haul track and dolly may be in order.

Start  by arranging the items you bring in, by approximate location to where they should be.
Make a mini map for yourself and plan ahead where you think things will fit in your booth.

A lot of commotion is going on.

Take a look and see what other folks are doing.
You can get great ideas for your next show!

Check out what containers they are using to carry their items.

Maybe you will want to get your own draperies.

You start by moving the tables away from your walls and hang everything you want.
Don’t forget to bring a ladder.

Once you are done with your wall set up, arrange your furniture.

Then it’s time to start arranging your table displays.

Take use of the space under the table.
You can hide your containers and wares under there tacked away.

You will need pens and paper.

Think about how you will charge your customers.
Most people prefer to pay with a credit card…

Take advantage of all areas of your booth for display.

Long power cords, splitters and lights could be very handy.

AAA Vac and Sew in San Mateo were kind enough to let me tag along.

You can check out the store:
AAA Vac and Sew
501 S. B Street • San Mateo, CA 94401
Phone: 650-344-5006
Email: aaavacsew2@sbcglobal.net
http://www.aaavacsew2.com

Every square inch of your booth is prime real estate.
Treat it as such!

Walk around and say hi to your fellow vendors, you may need to borrow something later on.

You may want to “close” your booth once you are done for the day.
And most important, have fun!

You can find more information about the Quilt, Craft & Sewing Festival
This year it’s FREE, enjoy!

The second part of the field trip with the sewing class, was to the Lacis Museum of Lace & Textiles

Established in 2004 by merging of the Lacis Retail store and the extensive collection of Kaethe and Jules Kliot.
An amazing dedication to the preservation of the finest of human handiwork.

You will find thousands of specimens from pre-Columbian Peru, the finest from the 17th c. European courts and examples of the machine laces exemplifying the 19th c. industrial revolution.

You are sure to find something interesting in the extensive library.
Rare & Special Titles are available.

Be sure to check the displayed lace within the panels

A wonderful place dedicated to preserving cherished heirlooms.

A wall of accessories to match.

They offer free shipping for all retail orders placed online.

Full Wholesale privileges are available.

Discounts are offered to Teachers, Schools and Institutions and Manufacturers .

They even have dreidels.

Remember “Gone with the Wind”? This is currently on display curtsy of the owners.

A few more period clothing on display.

 A gorgeous gown and a matching hat.

Be sure to check the new items introduced page for new items being available.

Lacis Bridal Services, send a photo of your dress and get photocopies of available laces.

Take a look at the Free Downloads page.

Want to check out the store?

http://lacismuseum.org

2982 Adeline Street
Berkeley, California  94703
 
at Ashby & Adeline St., adjacent to the “Ashby” BART Station
Hours: Monday thru Saturday 12:00 – 6:00 pm
Free Admission
tel: 510-843-7290